:	Jul 5, 2004

.

: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.

.

Remove the wheels and tires.

.

Disconnect both the stabilizer bar links from the stabilizer bar.   Remove the 2 nuts.

.

Remove the engine undershield.

.

Remove the front axle crossmember.   Remove the 4 bolts.

.

Remove the stabilizer bar bushing.   Remove the 4 nuts.   Remove the stabilizer bar clamps.

.

Remove the stabilizer bar.   Remove the stabilizer bar out through the LH side wheel arch.

.

Install the stabilizer bar.   Install the stabilizer bar through the LH side wheel arch.

.

Install the stabilizer bar bushing.   Install the stabilizer bar clamps.   Tighten the nuts to 115 Nm (85 lb.ft).

.

Install the front axle crossmember.   Tighten the 4 bolts to 115 Nm (85 lb.ft).

.

Install the engine undershield.

.

Connect both stabilizer bar links to the stabilizer bar.   Tighten the nuts to 115 Nm (85 lb.ft).

.

Install the wheels and tires.   Tighten the wheel nuts to 140 Nm (103 lb.ft).